Topic Progress: ← Back to Lesson Parts of the Cuatro A little bit of repetition….as you may have gone through this lesson already, but it…
A little bit of repetition….as you may have gone through this lesson already, but it never hurts to know your Cuatro. This kind of lesson is especially important if you are considering a new instrument, this way you will be able to mention to a luthier or specialist, exactly what you want and how you would like for it to be made.
As you may know, this lesson explains the different parts of the Cuatro. It is important to be able to describe your instrument and also to get to know it. Each Cuatro has specific characteristics and attributes. By using these features, you will be able to orientate yourself on your instrument. So if on the 8th fret there is a crack or a spot of wood which has a different color, you can use that as a reference.
This is the head of the instrument where the strings are tightened. There are several different styles of headstock used depending on the type of tuner
Pegs used to tune the strings individually. By turning the tuners it is possible to tune the strings (try not to tighten the strings too much….the strings may break!)
Typically a bone or plastic piece separating the headstock from the neck. The strings rest on this piece and are tense as they stay about 2 millimeters above from the neck
Four strings for the Cuatro used for producing the sound of the instrument.
The area where the strings are pressed to play different notes or to mark chords with.
Metal pieces which separate distances on the neck of the Cuatro. Each fret represents one semitone.
Here is where the sound comes from whilst plucking the strings or strumming
The section of the Cuatro where the strings are anchored. When changing the strings and placing new ones on the Cuatro, they first must be connected and fastened to the bridge.